E03-001. Silicone Mold Release Spray
주요기능 | it is used to easily remove the mold from the model |
관종 | TIN¢65S-527㎖ etc. |
크기 | Consulting available. |
용량 | Consulting available. |
특징 | When making the mold, it is used to easily remove the mold from the model No odor and residue left. It can be applied to various materials such as PP, PET, PE, etc. | 첨부파일 |
E03-001. Silicone Mold Release Spray
Product Features | it is used to easily remove the mold from the model |
Can Spec | TIN¢65S-527㎖ etc. |
Can Size | Consulting available. |
Volume | Consulting available. |
Special Features | When making the mold, it is used to easily remove the mold from the model No odor and residue left. It can be applied to various materials such as PP, PET, PE, etc. | Attached File |
E03-001. Silicone Mold Release Spray
主要功能 | it is used to easily remove the mold from the model |
容器种类 | TIN¢65S-527㎖ etc. |
容器尺寸 | Consulting available. |
容量 | Consulting available. |
特征 | When making the mold, it is used to easily remove the mold from the model No odor and residue left. It can be applied to various materials such as PP, PET, PE, etc. | 附加文件 |
Author
GSChem
Date
2017-12-11 16:34
Views
892
1. Product features
When making the mold, it is used to easily remove the mold from the model
No odor and residue left. It can be applied to various materials such as PP, PET, PE, etc.
2. Main Components
Isohexane, silicon (1000 cst)
3. Usage
Epoxy resin, phenol resin, melamine resin, pvc resin, etc
4. SPEC
5. How to use
• Remove foreign substance from the mold.
• Spray at a distance of 20 to 30 cm from the mold.
6. Precautions
Do not spray on food or face and avoid inhaling or eating.
• Keep out of reach of children.
• Be aware of the following precautions since it is dangerous as a flammable product containing high-pressure gas.
1. Do not use it against a flame.
2. Do not use near heater or stove.
3. Do not use indoors where using fire
4. Do not store in a place over 40 ℃.
5. Make sure to ventilate after using in an enclosed area
6. Do not throw it in fire.
7. Make sure there is no residual gas after use.
8. Do not store in an enclosed space.
9. If the temperature is below 5 ℃, the spraying condition may not be good.
When making the mold, it is used to easily remove the mold from the model
No odor and residue left. It can be applied to various materials such as PP, PET, PE, etc.
2. Main Components
Isohexane, silicon (1000 cst)
3. Usage
Epoxy resin, phenol resin, melamine resin, pvc resin, etc
4. SPEC
Volume | 420㎖ | 550㎖ |
Can | TIN¢65S-527㎖ | TIN¢65S-648㎖ |
MOQ | 20,000 | 20,000 |
Lead time | 5weeks(30days) | 5weeks(30days) |
5. How to use
• Remove foreign substance from the mold.
• Spray at a distance of 20 to 30 cm from the mold.
6. Precautions
Do not spray on food or face and avoid inhaling or eating.
• Keep out of reach of children.
• Be aware of the following precautions since it is dangerous as a flammable product containing high-pressure gas.
1. Do not use it against a flame.
2. Do not use near heater or stove.
3. Do not use indoors where using fire
4. Do not store in a place over 40 ℃.
5. Make sure to ventilate after using in an enclosed area
6. Do not throw it in fire.
7. Make sure there is no residual gas after use.
8. Do not store in an enclosed space.
9. If the temperature is below 5 ℃, the spraying condition may not be good.